Filter
Top Products
10 / 11 EN
Hood / User Manual
5 Maintenance
5.1 Grease Filters
5.1.1Cleaning Metal Self- Supporting
Grease Filters
• The filters must be cleaned every 2 months of
operation, or more frequently for particularly
heavy usage, and can be washed in a dishwas-
her.
• Remove the filters one at a time by pushing
them towards the back of the group and pulling
down at the same time.
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• When refitting the filters, make sure that the
handle is visible on the outside.
5.1.2 Cleaning Multilayer Metal
Grease Filters
• The filters must be cleaned every two months of
operation, or more frequently with heavy usage
and can be washed in a dishwasher.
• Release the filter retaining grill using the lateral
sliding handles.
• Remove the filter retaining clips.
• Remove and wash the filters. Allow them to dry
before refitting.
• Replace the filters on the grill, fix them in posi-
tion using the filter retaining clips and close the
filter retaining grill.
5.1.3 Replacing Synthetic Grease
Filter
• The filter is not washable and cannot be rege-
nerated, and must be replaced approximately
every two months of use, or more frequently
with heavy usage.
• Release the filter holder frame using the lateral
sliding handles.
• Remove the fIlter retaining clips.
• Replace the saturated synthetic filter.
• Fix the new synthetic filter using the retaining
clips and close the filter holder frame.