Beko CDA751F Refrigerator User Manual


 
Water dispenser (CDA752F ONLY)
Water dispenser is a very useful feature to obtain chilled
water without opening the door of your fridge. Since you
do not have to open the door of your fridge frequently, you
also save on electricitiy.
Using the water dispenser
Push in the lever of the water dispenser with your glass. By
releasing the lever, you cut off the dispensing.
When operating the water dispenser, maximum flow is
achieved by fully depressing the lever. Please note, how
much water flows from the dispenser depends on how far
you depress the lever. As the level of water in your cup /
glass rises, gently reduce the amount of pressure on the
lever to avoid overflow. If you depress the lever a small
amount, then water will trickle; this is perfectly normal and
is not a fault.
Filling in the water tank of water dispenser
Open the cap of the water tank as illustrated in the figure.
Fill in with pure and clean drinking water. Close the cap.
To avoid accidental water dispensing, we recommend
you to lock the water dispenser. [See Page 16]
Caution!
• Do not fill water tank with any liquid other than drinking
water; beverages such as fruit juice, carbonated fizzy soda
drinks, alcoholic drinks are not suitable for use with water
dispenser. If such liquids are used, the water dispenser will
malfunction and may be damaged beyond repair. The
guarantee does not cover such uses. Some chemical ingredients
and additives in such drinks / beverages may also attack and
damage water tank material.
• Only use clean pure drinking water.
• Capacity of water dispenser tank is 2.2 litres [3.8 pints], do
not overfill.
• Push the water dispenser lever with a rigid cup. If you are
using a plastic disposable cup, then push the lever with your
fingers from behind the cup.
• Safety Lock is supplied for your convenience when filling
the water tank and also to avoid small children tampering
with the water dispenser. [See Page 16]
15
how to use the accessories
Water Tank Capacity 2.2 Litres
Cleaning the water tank
Remove the water tank, open the latches on both sides and
detach the top cover mechanism from the water tank. Clean
the water tank with warm clean water, reinstall the top
cover mechanism and fasten the latches.
When installing the water tank, make sure that hooks behind
it fits securely into the hangers on the door. Make sure that
parts removed during cleaning (if any) are installed correctly
into their original locations. Otherwise, water may leak.
Important:
Water tank and components of water dispenser are not
dishwasher-proof.