Filter
Top Products
7
installation
1
2
3
4
5
6
Fit the two plastic wall spacers supplied with the appliance,
rotating turn to the condenser at the back of the appliance.
Locate the appliance on a smooth surface.
To ensure it is standing upright adjust the two front feet by
turning clockwise or anti-clockwise, until it is in firm contact
with the floor. Correct adjustment of feet avoids excessive
vibration and noise.
A special receptacle is supplied to store the mains plug during
transit. The receptacle is fixed at the back of the cabinet on the
side of the compressor. Gently remove the plug from the
receptacle. Never pull the mains cord, you may damage the
appliance. In case of transportation, ensure you locate the
plug in the receptacle provided to avoid transit damage.
The space in the room where the appliance is installed must
not be smaller than 10 cubic metres.
Fit the front grille supplied with your appliance as shown in
the diagram.
1
/
4
Wall spacers
Condenser
Plug receptacle
Adjustable feet