Beko CN232230 Refrigerator User Manual


 
3
Get to know your device
Warning
Below information about accessories are supplied
just for reference. Below accessories may not be
exactly same as the accessories of your
appliance.
Item 1
1. Control panel
2. Interior light
3. Fresh Food fan
4. Wine rack
5. Adjustable Cabinet shelves
6. Crisper cover
7. Salad crispers
8. Fresh zone compartment
9. Ice tray support & ice tray
10. Compartment for quickly freezing
11. Compartments for frozen froods keeping
12. Adjustable front feet
13. Dairy Compartment
14. Shelf for jars
15. Shelf for bottles
16. Freezer fan
The fans has the purpose to provide the
circulation of the air in compartment.
Prior to startup
Before you begin operating your device,
the following points should be re-checked for
safety:
Is the device standing properly on the floor?
Is there sufficient space for good air
circulation?
Is the interior clean? (Also see the section
“Cleaning and care”)
Now connect the appliance to the mains.
The compressor is turned on; the interior light
comes on when the Fridge door is opened.
Do not place foodstuff into the refrigerator until the
temperature has reached the desired level.
Setting the operating temperature
Fresh Food and Freezer Compartment Temperature
can be adjused by the electronic display (Item 2)
“ION” symbol is continuously lightning on display
and indicates that your appliance is provided with
ionizer.
The ionizer is an electronic device who cleans air
from bacteria in fresh food compartment. It operates
during certain intervals of time, start/stop of device
being controlled by a special algorithm.
Ionizer is switched off when fresh food compartment
door is opened.
Dual cooling system:
Your refrigerator is equipped with two separate
cooling systems to cool the fresh food compartment
and freezer compartment. Thus, air in the fresh food
compartment and freezer compartment do not get
mixed.
Thanks to these two separate cooling systems,
cooling speed is much higher than other type
refrigerators.
Odors in the compartments do not get mixed. Also
additional power saving is provided since the
defrosting is performed individually.
EN Instruction for use