Beko CWB 7441 X Ventilation Hood User Manual


 
10 / 20 EN
Hood / User Manual
2 Warnngs - Components
Connectng the power
cable to the mans
power supply
Before installation, check that the
mains voltage indicated on the rat-
ing plate inside the appliance cor-
responds to the voltage available in
your home. If the Hood is not fitted
with a plug have a licensed electri-
cian, fit the power cable with a plug
of a type approved for the load in-
dicated on the rating plate; when
connecting directly to the mains,
insert an omni polar circuit breaker
with a minimum contact aperture of
3mm and a size suitable for the load
in question between the appliance
and the mains supply, making sure
it is of a type that complies with
current regulations.
Components
2 No Wall Brackets C
1 No 150-120mm Ductng Spgot G
1 No Ar Outlet Connecton H
(Optonal)
2 No Charcoal Flters L (Optonal)