Filter
Top Products
EN
15
4 Before operating
Final Check
Before you start using the fridge/
freezer check that:
1. The feet have been adjusted for
perfect levelling.
2. The interior is dry and air can
circulate freely at the rear of the
cabinet.
3. Clean the interior as recommended
under “MAINTENANCE & CARE.”
4. Insert the plug into the wall socket
and switch on the electricity supply.
•Whenthedoorisopenthefridge
interior light will come on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
“Due to operation of fans inside
the fridge and the frost free freezer
compartments, overall noise level
is slightly higher in comparison to
non-frost free appliances. This is
quite normal and is not a fault.”
6. Set the thermostat half way
between min and max.
7. Front edges of the cabinet may
feel warm. This is normal.These areas
are designed to be warm to avoid
condensation.
8. “Do not load the appliance
immediately it is switched on. Wait
until the correct storage temperature
has been reached. We recommend
that you check the temperature
with an accurate thermometer (see;
Temperature Control and Adjustment)”
9.When the freezer reaches the
desired temperature the freezer fan will
stop. When the freezer fan is on, the
noise will be louder when the freezer
door is opened.
10. Control system determines
operation of the fridge fan in
accordance with the cooling
requirements. Fridge fan is designed to
ensure homogenous distribution and
circulation of the cold air inside your
refrigerator. When the fridge door is
opened, fridge fan stops.
11. Avoid spillage of food particularly
small items like rice, peas, beans
through the fan guard as they may
cause the cooling system to block and
therefore operate less efficiently.