Filter
Top Products
12
GB
! For level 5 and level 6 there is no
difference between hardness level
settings.
If the hardness of the water you
use is more than 80°dF (French
Hardness) or if you are using pit
water, we recommend that you use
ltersandpuriers.
* If your tap water is below 9F
(French hardness), you do not need
to use special dishwasher salt in your
machine. In this case, salt indicator
light will be on continuously.
• Open the door of the machine
• Press programme selection button
when machine is switched off.
• Keep programme selection button
pressed and press on/off button
to turn your machine on. Do not
release the programme selection
button until the dened “Water
Hardness Level Indicator” of your
machine is displayed ( See Water
Hardness Level Adjusment Table )
Programme Follow-up indicators
light up continously when machine
enters into the water hardness
adjustment mode.
• To adjust new Water Hardness
Level: adjust the water hardness
level according to the “Water
Hardness Level Adjustment Table”
( See Water Hardness Level
Adjusment Table ) by pressing the
programme selection button again.
• If you select a water hardness
level other than stored in the
memory, programme follow up
indicators ash with an interval
of 1 second. The selected water
hardness level in indicated by the
Programme Selection indicators.
• Press “Start/Pause/Cancel” button
for once to store the level you have
selected. Programme follow-up
indicators light up continuously
when the water hardness level is
stored.
• Press the on/off button to turn off
your machine.