Filter
Top Products
15
GB
dishwasher. Always place the
tablets in the detergent dispenser
of the detergent holder.
Using three-in-one detergent,
softening salt and rinse aid.
• These detergents will not give you
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
• Put your appliance’s rinse aid
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
• If you use combined detergents
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
• If you use combined detergents
without adding salt, lime scale may
form especially on glasses. To
avoid lime scale formation:
• Put your appliance’s water
softener setting at “1” and add salt.
When the salt is used up, add
more salt to the water softener.
Using two-in-one detergent:
detergent and softening salt
• These detergents do not contain
rinse aid so you need to use the
rinse aid setting as described
in the manual, making sure that
there is rinse aid in the rinse
aid dispenser with every wash
and that you rell the rinse aid
dispenser with rinse aid every time
it is empty.
Using two-in-one detergent and
rinse aid
• These detergents will not give you
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
• Put your appliance’s rinse aid
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
• If you use combined detergents
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
• These detergents do not contain
softening salt so you need to use
the softening setting as described
in the manual, making sure that
there is salt in the water softener
with every wash and that you rell
the water softener with salt every
time it is empty.
Important warning
Should you encounter a problem that
has previously never occured after you
start using these detergents, contact
the detergent manufacturer directly.
You will nd contact details on the
packet.
If you stop using this kind of
detergent:
• Ensure that the salt and rinse aid
dispensers are full.
• Put the water hardness setting at
the highest level and run a wash
cycle with the appliance empty.
• After washing while empty, return
the water hardness setting to the
correct level for your mains water