Filter
Top Products
15
GB
dishwasher. Always place the
tablets in the detergent dispenser of
the detergent holder.
Using three-in-one detergent,
softening salt and rinse aid.
These detergents will not give you •
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
Put your appliance’s rinse aid •
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
If you use combined detergents •
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
If you use combined detergents •
without adding salt, lime scale may
form especially on glasses. To avoid
lime scale formation:
Put your appliance’s water softener •
setting at “1” and add salt. When
the salt is used up, add more salt to
the water softener.
Using two-in-one detergent: detergent
and softening salt
These detergents do not contain •
rinse aid so you need to use the
rinse aid setting as described in the
manual, making sure that there is
rinse aid in the rinse aid dispenser
with every wash and that you refill
the rinse aid dispenser with rinse aid
every time it is empty.
Using two-in-one detergent and rinse
aid
These detergents will not give you •
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
Put your appliance’s rinse aid •
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
If you use combined detergents •
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
These detergents do not contain •
softening salt so you need to use
the softening setting as described
in the manual, making sure that
there is salt in the water softener
with every wash and that you refill
the water softener with salt every
time it is empty.
Important warning
Should you encounter a problem that
has previously never occured after you
start using these detergents, contact
the detergent manufacturer directly.
You will find contact details on the
packet.
If you stop using this kind of
detergent:
Ensure that the salt and rinse aid •
dispensers are full.
Put the water hardness setting at •
the highest level and run a wash
cycle with the appliance empty.
After washing while empty, return •
the water hardness setting to the
correct level for your mains water
hardness shown in the manual.
Put the rinse aid setting at the •
correct level.