Beko DSFN 6839 W Dishwasher User Manual


 
25
GB
You can use the Time Delay function if
you are utilizing the economic electricity
tariff.
If you want to change the programme
or functions while the Time Delay
function is enabled, then pause the
machine by pressing the Start / Pause
/ Cancel button. You will see that the
countdown stops. The Time Delay
indicator will start flashing. Select
the new programme and/or add the
functions as described in Programme
Selection and Table of Average
Consumption Values. Resume the
delayed start countdown by pressing
the Start / Pause / Cancel button.
If you want to cancel delayed start
countdown while it is in progress,
then press the Start / Pause / Cancel
button for three seconds. Release the
button when symbols start flashing
in the display. For a couple of minutes
the machine will fulfill the necessary
operations required for cancellation.
Remaining time indicator displays
“0:00”. You may select and operate a
new programme following the delayed
start countdown cancellation process.
If you want to select a new delayed
start time while the delayed start
countdown is in progress, then pause
the machine by pressing the Start /
Pause / Cancel button. Set the desired
time by pressing the Time Delay Button.
Start the countdown for the new time
by pressing the Start / Pause / Cancel
button again.
Salt Indicator
Please check the salt indicator on the
display to see whether there is enough
softening salt in your machine or not.
You need to refill the powder dispenser
whenever the salt warning indicator
light lights.
WARNING:
If the water hardness level is stored
as (r1), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)
Rinse Aid Indicator
Check the rinse aid warning display
on the screen to find out if there is
sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to
(OFF), rinse aid indicator will never
come on even if the rinse aid container
is empty.
Rinse Aid Indicator Setting
When your machine is switched •
off, press Half Load button and
then On / Off button to switch it on.
Hold Half Load • button pressed
and release On / Off button.
Keep Half Load • button pressed
for three seconds more.
Rinse Aid Indicator comes on •
and the stored rinse aid indicator
status of your machine appears on
the display in the format of “ON” or
“OFF”.
You can change the status of the •
indicator as “ON” or “OFF” with
Start / Pause / Cancel button. If
you switch off the machine with
“On/Off” button when the status is