Filter
Top Products
26
GB
“ON”, then the rinse aid indicator
will come on when the rinse aid
level in your machine becomes
low while the machine is in use.
If you switch off the machine with
“On/Off” button when the status is
“OFF”, then the rinse aid indicator
will never come on.
Starting Your Machine
Plug the mains plug into the wall •
socket.
Open the tap.•
Open the door. •
Place the dishes.•
Check if the upper and lower •
impellers rotate freely.
Put sufficient amount of detergent •
in the detergent dispenser and
close its lid.
Press On/Off button.•
Check if the salt and rinse aid •
warning indicators light and add
salt and/or rinse aid if needed.
Determine your washing •
programme with the aid of the
Programme Data and Table of
Average Consumption Values.
You can select the determined •
washing programme by pressing
programme selection button.
You can see the programme time •
in the Remaining Time Indicator.
If necessary, you can change your •
washing programme as you prefer
by means of the Add Function
Buttons.
Start the programme by pressing •
the Start / Pause / Cancel button.
WARNING:
Pay attention not to open the door of
the machine when it is running. Stop
the machine by pressing Start / Pause
/ Cancel button if you have to open
the door. Then, open the door of your
machine. There may be a rush of
vapor when you open the door of your
machine; be careful. Close the door
and press Start/Pause/Cancel button
again. Programme will resume running.
End of Programme indicator will •
light up.
Turn off your machine by pressing •
On / Off button.
Close the tap.•
Unplug the mains plug from the •
wall socket.
Leave your dishes in the machine •
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period. This will increase
the drying effectiveness of your
machine.