Filter
Top Products
1
2
3
4
15
cool your food quickly. When this function is
active, your refrigerator will run for 2 hours
without stopping.
Press the relevant button again to deactivate this
function.
13. Multi Zone Storage Compartment
Temperature Indicator
Indicates the temperature set for Multi Zone
storage compartment.
14. Economy Mode Indicator
Indicates that the refrigerator is running in energy-
efficient mode. Freezer Compartment temperature
This indicator will be active if the function is set
to -18 or the energy efficient cooling is being
performed due to Eco-Extra function.
15. Error Status Indicator
If your refrigerator does not cool adequately or
if there is a sensor failure, this indicator will be
activated. When this indicator is active, Freezer
Compartment Temperature indicator will display
“E” and Fridge Compartment Temperature
Indicator will display numbers such as “1,2,3...”.
These numbers on the indicator provides
information about the error to the service
personnel.
16. Key Lock Indicator
Use this function if you do not want your
refrigerator temperature setting changed. Press
Quick Cool Button and Multi Zone Storage
Compartment Temperature Setting Button
simultaneously for 3 sec. to activate this feature.
Press the relevant buttons again to deactivate
this function.
Door Open Alarm:
If the either of the fridge compartment door or
Multi Zone Storage Compartment door remains
open for minimum 1 minutes, audio Door Open
Alarm will be activated. Just press any button
on the indicator or close the open door to silence
the alarm.
Egg tray
• You can install the egg holder to the desired
door or body shelf.
• Never store the egg holder in the freezer
compartment.
Sliding Body Shelves
• Sliding body shelves can be pulled by slightly
lifting up from the front and moved back and
forth. They come to a stop point when pulled
towards front to allow you reach the foods placed
at the back of the shelf; when it is pulled after
slightly lifted upwards at the second stop point,
the body shelf will be released.
The shelf should be hold tightly from the bottom
as well in order to prevent it from tipping over.
The body shelf is placed on the rails at the sides
of the refrigerator body by bringing it to one
lower or one upper level.
The body shelf should be pushed backwards to
seat it completely.