Filter
Top Products
EN
6
ATTENTION: The following steps are
for the Microwave Oven models with the
Built-in Trim Kit Frame Only.
1. After taking all the accessories out of
the microwave oven, turn the microwave
oven over on its back and keep the base
of the microwave oven facing towards
you.
2. Remove the adjustable feet (Fig. No.
2) from the plastic bag and screw them
into the holders (Fig. No. 1), one by one.
3. Once all 4 feet are fitted, turn the mi-
crowave oven back over onto its feet to
check if the adjustable feet are level.
If the microwave oven is unstable,
adjust the feet by screwing them
up or down accordingly.