Beko RDNE455K20ZX Refrigerator User Manual


 
31/35 EN
Refrgerator / User Manual
6 Mantenance and cleanng
Service life of the product is increase if it
is regularly cleaned
B
WARNING: Frst unplug the product
before cleanng your refrgerator.
•
Never use any sharp and abrasve
tools, soap, household cleaners,
detergent and wax polsh for cleanng.
•
Dssolve one teaspoon of carbonate
n half lter of water. Soak a cloth wth
the soluton and wrung t thoroughly.
Wpe the nteror of the applance wth
ths cloth and the dry thoroughly.
•
Make sure that no water enters the
lamp housng and other electrcal
tems.
•
Clean the door wth a damp cloth.
To remove door and body shelves,
remove all of ts contents. Remove
door shelves by movng them
upwards. After cleanng, slde them
from top to bottom to nstall.
•
Never use cleanng agents or water
that contan chlorne to clean the
outer surfaces and chromum coated
parts of the product. Chlorne causes
corroson on such metal surfaces.
6.1. Avoiding bad odors
Materials that may cause odor are not
used in the production of our appliances.
However, due to inappropriate food
preserving conditions and not cleaning
the inner surface of the appliance as
required can bring forth the problem of
odor.
Therefore, clean the refrigerator wth
carbonate dssolved n water every 15
days.
•
Keep the food n closed contaners.
Mcroorgansms spreadng out from
uncovered contaners can cause
unpleasant odors.
•
Never keep the food that have expred
best before dates and spoled n the
refrgerator.
6.2. Protecting the
plastic surfaces
Clean with arm water immediately as the
oil may cause damage on the surface
when it is poured on plastic surfaces.
6.3. Door Glasses
Remove the protective foil on the
glasses.
There is a coating on the surface of
the glasses.This coating minimizes the
stain build-up and helps to remove the
possible stains and dirt easily.Glasses
that are not protected with such a
coating may be subject to persistent
binding of air or water based organic or
inorganic dirt such as limescale, mineral
salts, unburned hydrocarbons, metal
oxides and silicones that can easily and
quickly cause stains or material damage.
Keeping the glass clean becomes too
difficult despite the regular cleaning.
Consequently, the appearance and the
transparency of the glass deteriorates.
Harsh and corrosive cleaning methods
and compounds will intensify these
defects and speed up the deterioration
process.
Water-based cleaning products that are
not alkaline and corrosive must be used
for regular cleaning purposes.
Non-alkaline and non-corrosive materials
must be used for cleaning so that the
service life of this coating lasts for a long
time.