Beko TZDA 504 F Freezer User Manual


 
TRANSPORTATION INSTRUCTIONS
1. The freezer should be transported only in a vertical upright position.
The packing as supplied must be intact during transportation.
2. If during the course of transport the appliance has to be transported horizontally,
the product must only be laid on its right hand side (when facing the door
front) and it must not be operated for at least 4 hours to allow the system to
settle after the appliance is brought back to upright position.
3. Failure to comply with the above instructions could result in damage occuring
to the freezer. The manufacturer will not be held responsible if these
instructions are disregarded.
4. The freezer must be protected against rain, moisture and other atmospheric
influences.
5. When positioning your appliance take care not to damage your flooring,
pipes, wall coverings etc. Do not move the appliance by pulling by the door
or handle.
IMPORTANT : Care must be taken while cleaning / carrying the appliance to
avoid touching the bottom of the condenser metal support or pipework at the
back of the appliance as you might injure your fingers and hands or damage
your product.
IMPORTANT : This appliance is not designed for stacking with any other
appliance.
Do not attempt to sit or stand on top of your appliance as it is not designed for
such use. You could injure yourself or damage the appliance.
IMPORTANT : Make sure that mains cable is not caught under the appliance
during and after carrying / moving the appliance, to avoid the mains cable
becoming cut or damaged.
Do not allow children to play with the appliance or tamper with the controls.
BEKO plc declines to accept any liability should the instructions not be
followed.
4