Glen Dimplex Home Appliances Ltd BE813 Refrigerator User Manual


 
12
REPLACING THE INTERIOR LIGHT BULB (See diagram)
Should the light fail to work switch off at the socket outlet and pull out the
mains plug. Follow the instructions below to check if the light bulb has worked
itself loose.
If the light still fails to work obtain a replacement E14 screw cap type 15 Watt
(Max) bulb from your local electrical store and then fit it as follows:
1. Switch off at the socket outlet and pull out the mains plug. You may
find it useful to remove shelves for easy access.
2. Remove the light diffuser cover as shown in figure (b-c).
3. Replace the burnt-out light bulb.
4. Reassemble the light diffuser cover as shown in figure (d).
“Push firmly to ensure cover is fitted properly.”
5. Carefully dispose of the burnt-out light bulb immediately.
"Replacement light bulb can easily be obtained from a good local electrical or
DIY store."
a b c d
1
2
3
Push firmly