Filter
Top Products
Continuous Feed Food Processors
Berkel M2000 / M3000
10
CLEANING
WARNING: Unplug unit from power supply prior to cleaning.
REMOVE FEED HOPPER LID and rinse thoroughly under running water.
NEVER USE DISHWASHER. Feed hopper lid may be soaked in sanitizing
lotion if desired.
HAND WIPING or RINSING of the cutting compartment of the Berkel
Food Processor is recommended. Do not use pressure washer inside the cut-
ting compartment.
WARNING: The SLICING AND DICING ACCESSORIES are
equipped with SHARP KNIVES. Use caution when rinsing the accessories
or when sanitizing. NEVER PLACE ACCESSORIES INTO THE DISH-
WASHER and NEVER LEAVE ACCESSORIES submerged in sanitizing
lotion unless attended by operator. IMMEDIATELY REMOVE accessories
from sanitizing lotion after soaking and store in accessories storage rack in
safe and visible place.
PREVENTATIVE MAINTENANCE
WARNING: The power cord must be disconnected prior to the start of
any inspection or check-up.
ALWAYS REMOVE ANY ACCESSORIES from the Berkel Food Processor
prior to any maintenance or inspection.
The Berkel Food Processor does not require periodic maintenance. All mov-
ing internal parts are quipped with DOUBLE SEALED BALL
BEARINGS which are maintenance free. NO LUBRICATION REQUIRED.
DO NOT DIRECT water pressure or steam directly to the housing or
bottom of the food processor.