Filter
Top Products
Continuous Feed Food Processors
Berkel M2000 / M3000
11
TROUBLE SHOOTING GUIDE
MACHINE DOES NOT START
— Check power supply cord and outlet.
— Check whether feed hopper is properly installed and locked in place.
— Check whether magnet in toggle lock is intact. (Part #2110)
VEGETABLES WHEN DICING ARE NOT CONSISTENTLY
DICED
— Ensure, when dicing, that you use large feed opening only.
(See operating instructions)
— Place vegetables in hopper while machine is in OFF position.
Place pusher on vegetables and exert sufficient pressure so that
vegetables are in contact with slicer.
— When dicing celery and onions, while machine is running, feed one
onion at a time and use pusher to hold onion or celery onto knife.
— Cutting edges on slicer or dicing grid are not sharp.
NOTE: It is important that constant pressure be applied on
the vegetables.
FOOD PROCESSOR STALLS WHEN DICING OR
SHREDDING CHEESE
— Check tension of Poly-V-Belt. (Consult parts manual and authorized
service technician)