Black & Decker BX385 Blender User Manual


 
6
ENGLISH
Reccomendations when
mincing (BX390 Only)
* The mincer should only be used for very hard
cheeses such as parmesan.
Note: The mincer should not be continuously
run for longer than 40 seconds.
Useful advice
Note: Do not exceed the maximum capacity of
1.5 litres.
When blending is complete return the control
knob to the off (0) position.
Once the blade has come to a complete
stop, lift the jug (D) from the blender body (I).
Remove the lid (B) and pour the ingredients
into a suitable container.
Liquids can be poured through the pouring
spout (C) by lifting the spout cover.
Note: Ingredients can be added by inserting
them through the hole left when the filler cap (A)
is removed.
Warning! Never operate the Blender without
the lid (B) fitted.
Warning! Do not use any of the accessories
with out the required seal.
Maintenance & cleaning
Switch the appliance off, remove the plug
from the wall socket and wait until the blade
has stopped rotating.
The appliance is easier to clean if you do so
immediately after use.
Do not use abrasive cleaning agents,
scourers, acetone, alcohol etc. to clean the
appliance.
All detachable parts are dishwasher-safe.
Place the detachable plastic parts on the top
tray of the dishwasher. Make sure they are
placed well away from the heating element.
All removable parts can be cleaned with a
cleaning brush in warm water with some
washing-up liquid and rinse them under the
tap.
Remove the dirty parts from the motor unit.
Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor
rinse it under the tap.
Technical data
Meat 20 sec 1 50g
Cheese * 10 sec 2 50g
Ingredients Max Run Time Speed Max Quantity
(Seconds) (g)
BX385, BX390
Voltage 220 – 240 Volts
Supply 50 Hz
Power consumption 400W
Weight (BX385) 2 kg
Weight (BX390) 2.5 kg