Filter
Top Products
• Once open, the lid can be removed by
releasing the clips and then lifting it vertically
from the appliance.
• To re-fit the lid, insert the 2 posts into the slot
in the appliance. Close the lid, ensuring it
locks in place.
Basket
• Raise the basket handle (7) until it locks in
the horizontal position.
• Press the lid release button (2) & allow the lid
(1) to open.
• Lift the basket (10) from the Fryer.
• To re-fit the basket, insert the rib on the
basket into the slot in the appliance and
lower into position.
• Close the lid, & press the handle release
button (8). Slowly lower the handle to the
vertical position.
Cooking bowl
• Press the lid release button (2) & allow the lid
(1) to open.
• Lift the basket (10) from the Fryer.
• Grip the bowl (9) at either side & lift it from
the cavity.
• To re-fit, place it back in the cavity, ensuring
the mark on the bowl is matching with mark
on the unit and it is correctly seated. Re-fit
the basket, lower it & close the lid.
Use
Adding oil
• Raise the basket handle (7) until it locks in
the horizontal position.
• Press the lid release button (2) & allow the lid
to open.
• Lift the basket (10) from the Fryer.
• Remove the cooking bowl (9).
• Check the element for signs of damage or
debris to prolong the life of the appliance &
improve efficiency.
Note: The bowl should only be removed while
the product is cool.
• Place the cooking bowl back in the appliance
making sure it is seated correctly.
Note: If the cooking bowl is not seated correctly
the fryer will not function.
• Pour good quality cooking oil into the cooking
bowl. Always make sure the oil level is
between the maximum & minimum marks on
the cooking bowl. (Approx 1.65 liters)
Note: Cook only in the bowl supplied.
• Fit the basket into the appliance. Close the lid
& press handle release button to lower the
handle to the vertical position.
Cooking
• Connect the appliance to a suitable electrical
supply. Slide the temperature control (6) to
the required setting.
• Press the on/off button (3). The on/of indicator
lamp (4) and the temperature indicator lamp
(5) will light up to indicate the appliance is on
and the oil is being heated.
• The temperature indicator lamp (5) will go out
the oil is at the selected temperature.
• Preheating the empty basket in this way will
help prevent food sticking to it.
• Raise the handle (7) to the carrying position.
• Press the lid release button (2) & allow the lid
to open.
• Remove the basket & close the lid. Place the
basket on a worktop, using clean cloth or
paper towels to prevent marking the work
surface.
• Place the prepared ingredients in the basket
(10), then open the Fryer lid & fit the basket to
the appliance, slowly lowering into the oil.
ENGLISH
5