Black & Decker KEC500 Can Opener User Manual


 
Do not operate if the electrical cord, plug, or charger is damaged or
malfunctions in any manner. Return the can opener to the nearest
Black & Decker authorized service facility for examination, repair, or
adjustment.
This product contains nickel-cadmium batteries which must be recycled
or disposed of properly at the end of the life of the can opener (see
“Battery Removal and Disposal”). Do not incinerate or compost batter-
ies as they will explode at high temperatures.
Leaks from battery cells can occur under extreme conditions. If the liq-
uid, which is a 20-35% solution of potassium hydroxide, gets on the
skin (1) wash quickly with soap and water or (2) neutralize with a mild
acid such as lemon juice or vinegar. If the liquid gets into the eyes,
flush them immediately with clean water for a minimum of 10 minutes.
Seek medical attention.
NOTE: The rubberized grip is free of natural rubber and latex. It is safe
for use by individuals allergic or sensitive to these materials.
CHARGING PROCEDURES
IMPORTANT: Before first use, place the unit in the Charging Base so that
the Tab on the handle fits into the notch on the base ( ). Push all the
way down to assure proper charging. Leave it plugged in for 24 hours
for best operating capability.
3
How To Use
SAVE THESE INSTRUCTIONS
Locating Tab
Cutting Assembly/Pierce Lever
Magnet
Can Opener Unit
Locating
Tab
Charging Base