Black & Decker SB3040 Blender User Manual


 
English
-4-
Intended use
Your Black & Decker stick blender has been
designed for blending, mixing, beating,
whipping, whisking and chopping food and
beverage ingredients. Do not use this
appliance for any other purpose. This
product is intended for household use only.
Safety instructions
Warning! When using mains-powered
appliances, basic safety precautions,
including the following, should always be
followed to reduce the risk of fire, electric
shock, personal injury and material
damage.
Read all of this manual carefully
before using the appliance.
The intended use is described in this
manual. The use of any accessory or
attachment or the performance of any
operation with this appliance other than
those recommended in this instruction
manual may present a risk of personal
injury.
Retain this manual for future reference.
Using your appliance
Make sure that the appliance is switched
off before connecting to or disconnecting
from the power supply.
Always take care when using the
appliance.
Do not use the appliance outdoors.
Always protect the motor unit from water
or excessive humidity.
Do not operate the appliance if your
hands are wet.
Do not operate the appliance if you are
barefoot.
Do not touch moving parts. Keep long
hair and loose clothing out of the way of
the moving parts.
Guide the power supply cord neatly so it
does not hang over the edge of a
worktop and cannot be caught
accidentally or tripped over.
Never pull the power supply cord to
disconnect the plug from the socket.
Keep the power supply cord away from
heat, oil and sharp edges.
Switch off and wait for the motor to stop
running before disconnecting the
appliance from the power supply.
Never detach any part or accessory while
the appliance is still connected to the
power supply. Always disconnect the
appliance from the power supply first.
If the power supply cord is damaged
during use, disconnect the appliance
from the power supply immediately. Do
not touch the power supply cord before
disconnecting from the power supply.
Disconnect the appliance from the power
supply when not in use, before fitting or
removing parts and before cleaning.