Blanco B 830FX Microwave Oven User Manual


 
MODEL NO. B
830FX
PART IDE~CATION SHEET
1.
FASCIA ASSEMBLY
2.
MOUNTING
T-iRAR/LE,
ASSEMBLY
3.
BASE ASSEMBLY
4.6
off
6
GUAGE SCREWS
CAUTION
Read and follow all of the instructions completely.
1
The Blanco Built-in Trim Kit must be installed in accordance with the full set of instructions listed and meet the regulations laid
down by electrical authorities, building regulations and the requirements of state and local government authorities.
2 The microwave oven must be unplugged before installation of the Blanco Built-in Kit.
3
For safe use of the microwave oven, DO NOT modify or alter any part of this kit.
4
The kitchen cabinetry that houses the microwave oven must be constructed to allow the microwave oven to operate to Australian
Standards 3350.1-2002, 60335.1,3350.2.25-2001 and 60335.2.25.
CLEANING TIPS
\
Use a domestic stainless steel cleaner, applied to a soft cloth. Wipe in the stainless steel grain direction. DO NOT use abrasive,
\
harsh cleaners or scouring pads.
T
SPECIFICATIONS
Overall Kit Dimensions;
Width 596mm
Height 380mm
Depth 22mm (Fascia)
Cavity Dimensions
Internal Width
600rnrn
External Front Height 381mm
Depth 5OOmm(MIN.)
Cabinetry Ventilation
An opening on the upper cavity panel must be cut for air circulation. This opening should be placed at the rear- minimum
600mm
x
100mm.