Filter
Top Products
kitchen microwave oven cavity.
screw into place using the four 6g screws
provided. There are four screw holes in each
corner of the frame, located next to the clips.
3. Align the Base Assembly and the
Mounting Frame and screw together
using the two 6g screws provided.
5.
Remove plastic protective coating
from Stainless Steel fascia. Align and
sit the stainless steel fascia onto the
bottom left and right mounting frame
clip, one at a time.
4..
Plug the microwave oven into an
approved
240
volt,
10
amp powerpoint.
DO
NOT
turn on until after the
installation is complete. Carefully
insert the microwave oven onto the
Base Assembly. Ensure the microwave
oven feet locate within the base
assembly feet locators.
6.
Apply pressure to the top right and
left corner of the stainless steel fascia
until it clips into place securely.
Clean with a mild stainless steel
cleaner. (See care and cleaning).
Note: The Base
Assembly is adjustable. If the microwave oven is not sitting flush with the trim fascia, there are two
screws located on the bottom sidc of thc basc at thc rcar for adjustrncnt purposes.