Filter
Top Products
Présentation de votre lave-vaisselle
9
Présentation de votre lave-vaisselle
8
What to do before using the machine for the first time
For easy loading, the detergent container is located on the front of the
upper basket.
The detergent container is designed to take tablets, powder or liquid
recommended for dishwasher use.
VERY IMPORTANT:
- For good wash results it is recommended to use individual
detergent, salt and rinse aid products.
- However “2 in 1” tablets (detergent and rinse aid) can be
used. You may need to adjust the rinse aid dial according to
the wash results (see page 8).
- Good wash results depend on getting the salt + rinse aid
levels set correctly according to use level of water hardness
(see pages 6-7).
Tablets
Place the tablet in the compartment.
underneath the top basket.
Only use the washing
products specially desi-
gned for dishwasher use.
Powder or liquid
Pull the container out to fill it with liquid deter-
gent or powder.
Fill it up to the Minimum mark for lightly soiled
items.
Fill it up to the Maximum mark for dirty items.
Close the container.
Keep all these pro-
ducts out of children’s
reach and away from
any damp environment.
STEP 3: Washing products
for a clean wash
What to do before using the machine for the first time
STEP 2: Rinse aid
For brilliant and very dry results
See Page 17 : symbol indicating the rinse aid indicator
light:
This illuminates showing “add rinse aid.” Please add rinse aid.
Contents: 120 ml (approx. one glass)
➀➀
Filling
When putting the machine into oper-
ation, fill the container level with the
top of the adjustment lever.
Close the container tightly
Opaque: some product remaining
Brilliant: container empty
Indicator:
➁➁
Adjustment (if necessary)
The original setting is in the middle
(Medium position: setting 2).
After a few cycles, if there are streaks or
the drying is poor, you can adjust the set-
ting using the adjustment lever:
- Setting 1 to reduce the dose, (soft water)
- Setting 3 to increase the dose
(hard water)
Adjustment lever
Should any rinse aid
overflow when filling, mop up
the excess to avoid foam forming.