Filter
Top Products
SPECIFICATIONS SECTIONAL FRYER FILTER SYSTEM
PAGE 4 OF 20 OWNER’S MANUAL 1184960
SPECIFICATIONS
NOTICE
Local codes regarding installation vary greatly from one area to another. The National Fire Protection Association,
Inc. states in its NFPA 96 latest edition that local codes are the “authority having jurisdiction” when it comes to
installation requirements for equipment. Therefore, installations should comply with all local codes.
Blodgett Range reserves the right to change specifications and product design without notice. Such revisions do
not entitle the buyer to corresponding changes, additions, or replacements for previously purchased equipment.
This product is intended for commercial use only, not for household use.
The installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1, Natural Gas Installation Code, CAN/CGA-B149.1, or the Propane Installation Code CAN/CGA-
B149.2, as applicable, including:
1. The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during
any pressure testing of that system at test pressures in excess of 1/2 psi (3.45 kPa).
2. The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve
during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.45
kPa).
DIMENSIONS
Figure 2
6" (152)
30"
(762)
FRONT VIEW
60"
(1524)
72"
(1829)
24" Flue Riser
36" Flue Riser
36"
(914)
33-3/4"
(859)
SIDE VIEW
2-1/2" (64)
35-3/4" (908)
32" (813)
38" (965)
41-3/4" (1060)
Flue riser for “deep” depth-option extends rearward 6"
(drain pan size is the same as for “standard” depth).
Front Gas
Manifold
TOP VIEW
24"
(610)
32"
(813)
4"
(102)
2"
(51)
Optional drain pan is 12-1/4" (311 mm) wide
and 20" (508 mm) front-to-back.
Dimensions are in inches and (millimeters).
SHIPPING CRATE DIMENSIONS & WEIGHT
Width Height Depth Volume Weight
44.0
(1118)
45.0
(1143)
45.5
(1156)
52.1 cu ft
(1.48cum)
200 lbs
(91 kg)
CLEARANCES
Clearance must be provided in front of the cabinet for servicing and for operation. If the appliance is installed as part
of a battery that has a continuous shared flue riser, follow the minimum clearance requirements for the flue riser of the
adjoining section(s).