Blodgett B36-NFR Oven User Manual


 
INFRARED/RADIANT COMPACT BROILER
INSTALLATION & OPERATIONS MANUAL 1186529 REV 3 (12/06) PAGE 21 OF 24
ADJUSTMENT OF BROILER BURNERS
The burners require no air adjustment after they have left the factory. If a major change in burner operation is noticed,
check for obstruction of airflow, around the orifice. Burner performance is affected by (a) orifice size, (b) pressure, (c)
injection, and (d) primary airflow. The burner orifice must be centered within the air mixer opening.
ADJUSTMENT OF GAS PRESSURE REGULATOR
The pressure regulator is located in the right-hand and left-hand interior compartment of the broiler. Accessing it will
require removing the front panel and the side panels of the broiler. The regulator is preset for 4" W.C. for natural gas,
or 10" W.C. for propane gas. If adjustment is necessary, do the following:
1. Turn broiler control knob to OFF.
2. Attach a pressure-measuring device to the 1/8" NPT connector located on the front of each burner manifold.
3. Turn the broiler control knob to HIGH and, with the burners lit, check the manifold pressure. The pressure should
be 4" W.C. (for natural gas) or 10" W.C. (for propane gas).
4. If necessary, adjust the pressure by unscrewing the top of the pressure regulator (use a screwdriver) to expose
the adjustment screw underneath. Rotating the adjustment screw clockwise increases the manifold pressure.
5. After the pressure has been adjusted, turn the broiler control knob to OFF, replace the top of the pressure
regulator, and disconnect the pressure-measuring device (replacing the plug into the connector on the manifold).
PARTS
The following table describes the serviceable parts. For parts not listed, contact a Blodgett Range Authorized Parts
Distributor or a Blodgett Range Authorized Service Agency.
PARTS LIST PARTS LIST
Part Number DESCRIPTION
B36-NFR B36-RAD
Part Number DESCRIPTION
B36-NFR B36-RAD
1183202 Body Side, Left 1 1 1183318 W/A, Shaft-36” 1 1
1183323 Body Side, Right 1 1 1183248 Tube, Burner Supply ( V ) 2 2
1183273 Bracket, Bearing Lock 2 2 1183264 Tube, Pilot Adjust 1 1
1183278 Bracket, Spring Adjust 2 2 1183310 Tube, Flex, ¼ X 16” LG. 2 2
1183304 Plate, Cover 2 2 1183315 Nipple, Pipe,BLK. 3/8” X 8” 1 1
1183308 Bracket, Arm Adjust 1 1 1183259 Tube, Burner Supply (H) 2 2
1183269 Clip, Retainer 1 1 1183295 Spring, Pivot Arm 1 1
1183332 Bracket, Orifice 4 4 1183311 Spring, Rack 2 2
1183201 Front, Body, 36 1 1 1160484 Roller Bearing 9 9
1183187 Base, 36, SS 1 1 1184990 Handle, Chrome 1 1
1183209 Grease Drawer, BA 1 1 1184192 Knob, Cast Aluminum 2 2
1183210 Body, Bottom/Back, 36 1 1 1060475 Knob, Ball 1 1
1183222 Stiffener, Cavity, SS, 36 1 1 1183279 Weight, Counter Balance 2 2
1183262 Cover, 36 1 1 1183287 Spacer, Bearing 2 2
1183263 Plate, Heat Deflector, 36 1 1 1164085 Valve ASM, Pilot 1 1
1183272 Rack, Mount Angle, 36 1 1 1185006 Nameplate, Blodgett 8” X 1.3” 1 1
1183284 Plate, Face, BA 1 1 1183256 Tube, Valve Supply, 36 1 1
1183313 Drip Pan, 36 2 2 1183296 Rack, 36 (Chrome) 2 2
1183257 Mount, Burner, 36 1 1 1183297 Rack, 36 (CRS) 2 2
1183220 Deflector, Flue, 36 1 1
1188958 Burner, Radiant - 4 (NAT) Gas Components
1183246 ASM, Burner, Infrared 4 - 1133301 Regulator, WC @ 4” NAT 2 2
1183277 W/A, Bracket Bearing 2 2 1176014 Valve, Burner, NAT 2 2
1183271 W/A, Bearing Pivot 2 2 1008754 Orifice Hood, Drill #54 4 -
1183281 W/A Bracket, Bearing 2 2 1008752 Orifice Hood, Drill #52 - 4