Filter
Top Products
EN
11
Water connection
Depending on the model of the
refrigerator, you can connect it either to
a demijohn or water mains.
First you must connect the water hose
to the refrigerator.
In cases where a demijohn is used, a
separate pump must also be used.
WARNING: Refrigerator and the
pump, if any, must be unplugged
during connection.
Following parts may not be supplied
with your product since they are not
required when using a demijohn.
Check that following parts have been
delivered together with the product:
1.Union for connecting the water hose
to the rear of the refrigerator
2.3 pieces of pipe clips (used to secure
the water hose)
3.5-meter long water hose (1/4 inch in
diameter)
4.Cold mains water valve with mesh
filter (tap adapter)
5.External water filter. (If there is
a demijohn connection; it is not
necessary to use a water filter.)
3
1
4
2
*5
Connecting the water hose
to the refrigerator
1.Slip the union (b) onto the water
hose (a).
2.Push the water hose downwards
firmly to slip it onto the water inlet valve
(c).
3.Tighten the union (c) by hand to
secure it onto the water inlet valve.
Normally, you are not required to
tighten the union with a tool. However,
you can use a spanner or pliers to
tighten the union if there is a leakage.
c
a
a
b
1
2