22
USA
11. TROUBLE SHOOTING
What if the dishwasher will not run :
Is the machine plugged in?•
Are all fuses operative?•
Is the water supply fully turned on?•
Is the dishwasher door closed securely?•
Have you pressed the On/Off button?•
What if the dishwasher starts but fails to circulate water within 5 seconds :
Cancel the program by pressing the Start/Pause button for 5 seconds. See section 6. or •
Quick Reference Guide.
What if the door will not stay down in open position :
Adjust door tentioners (wooden door models only, see Installation Manual)•
What if the dishwasher produces poor cleaning results :
“Follow the instructions given in the following pages”•
The dishes are not dry
Possible causes How to fix these problems
Improper loading• Load the dishwasher as suggested in this •
manual.
Insufficient rinse aid •
supply
Increase the dosage amount of rinse aid •
and/or refill the rinse aid dispenser.
Dishes are removed too •
soon
Do not empty your dishwasher immediately •
after washing. Open the door slightly so
that the steam can escape. Begin with
unloading the dishwasher when the dishes
are only hand warm. Empty the lower rack
first. This prevents water from dripping off
dishes in the upper rack.
Wrong program selection• In short period programs, the wash •
temperature and therefore the cleaning
performance is lower. Choose a program
with a longer washing time.
Washing cutlery with •
worn surface.
Evaporation of water is more difficult with •
these items. Cutlery or dishes of this type
is not suited for dishwashers.