Filter
Top Products
6
USA
A
B
C
A
4.1 UPPER RACK
Load the upper rack with dessert plates,
cups, glasses etc.
4.1.1 HEIGHT SETTING
(MODEL DEPENDING)
In certain models, the height setting of
the upper rack may be changed using the
wheels which are present at two height
levels.
CAUTION
Make sure that the rack is empty.
Changing the height setting while the
rack contains tableware could cause the
contents to dislodge, causing personal
injury or damage to the tableware.
1. Release the latches on both the right
and left tracks of the upper rack by turning
them to the outside A.
2. Pull out the rack completely B.
3. Place the rack into the tracks again at
the desired height C.
4. Push the latches back into the correct
position.
4.1.2 VARIABLE HEIGHT SETTING
(MODEL DEPENDING)
The upper rack is equipped with a lifting
mechanism which enables you to change
the height of the rack even if it is fully
loaded, and without having to remove it
from the dishwasher.
LIFT UPPER RACK
1. To lift the upper rack to a higher position,
hold it on one side and carefully pull it
upwards A.
2. To lift the opposite side of the rack, hold
it and pull it upwards in the same manner.