Filter
Top Products
EN
19
4 Before operating
Final Check
Before you start using the freezer
check that:
1. The feet have been adjusted and
the product is level.
2. The interior is dry and air can
circulate freely at the rear.
3. Clean the interior as recommended
under "CLEANING AND CARE."
4. Insert the plug into the wall socket
and switch on the electricity supply.
Avoid accidental disconnection by
taping over the switch.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
7. Front edges of the cabinet may feel
warm. This is normal. These areas are
designed to be warm to avoid
condensation.
9. Do not load the appliance
immediately it is switched on. Wait
until the correct storage temperature
has been reached. We recommend
that you check the temperature
with an accurate thermometer (see;
Temperature Control and Adjustment).