Blomberg IWD 1006 XT Refrigerator User Manual


 
EN
25
Sliding Body Shelves
Sliding body shelves can be pulled by
slightly lifting up from the front and moved
back and forth. They come to a stop point
when pulled towards front to allow you
reach the foods placed at the back of the
shelf; when it is pulled after slightly lifting
upwards at the second stop point, the
body shelf will be released.
The shelf should be held tightly from the
bottom as well in order to prevent it from
tipping over. The body shelf is placed on
the rails at the sides of the refrigerator body
by bringing it to one lower or one upper
level.
The body shelf should be pushed
backwards to seat it completely.
1
2
3
4
Using the water spring
Warnings
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
In cases where the water dispenser
has not been used frequently, sufficient
amount of water must be drained from
the dispenser to get fresh water.
Spillage Tray
Water drops that drip during use,
accumulates in the spillage tray. You
can remove spillage tray by pulling it to
yourself. You can remove the water with
a sponge or a soft cloth.