Bodum 5057 Hot Beverage Maker User Manual


 
INSTRUCTION FOR USE
3
If the kettle is too full, boiling water may splash out.
– Always make sure you pour boiling water slowly and carefully without
tipping the spout of the kettle too quickly.
– Avoid contact with steam emitted from the hole in the cap when the water is
boiling or just after it has been switched off to avoid scalding.
Be careful when removing the cap to refill the kettle when the kettle
is still hot.
– Do not forcefully hold the switch in the ON position or tamper with the switch
to hold it in the ON position as this may cause steam to be ejected which
could damage the automatic switch-off mechanism as well as cause personal
injury.
WARNING
– When the water boils, steam comes out of the opening
in the cap, as shown in the picture. Users should
take particular care when using the kettle as steam
is very hot and can easily burn you.
– Please make sure the power cord does not touch
the metal surface of the kettle as it gets very hot
during the boiling process.
Ensure that the kettle is switched off before removing it
from the base.
– Do not use the kettle for any purpose other than for boiling water.
– Extreme caution must be taken when moving the appliance when it contains
hot water.
Do not place the base of the kettle onto a metal tray or any
other metal surface when it is plugged into a power source.
– Do not use the appliance if there is any damage to the body, base, power cord
or plug. If the appliance is damaged, it must be repaired by the manufacturer
or an authorised agent in order to avoid danger.
SAVE THESE INSTRUCTIONS!