Filter
Top Products
FROTHING MILK · HOT WATER
11
HOT WATER
1. Remove the froth
enhancing steam attach-
ment from the steam
nozzle.
2. Press the WATER
button.
3. Swing the steam noz-
zle inwards over the drip
tray and place a container
under it.
4. Open the water control
knob to the left for hot
water and back again for
stopping the water.
5. Press the WATER
button again to get back
to READY STATE.
FROTHING MILK
1. Attach the froth
enhancing steam attach-
ment to the steam nozzle.
2. Press the STEAM
button.
4. Close the water control
knob to stop the steam.
5. Press the STEAM
button again to get back
to READY STATE.
Note: Before the machine goes back to READY STATE the heater temperature will go down. POWER light changes to green and starts to flash
as long as the heater temperature goes down. While cooling down, the machine may make a knocking noise and steam will come out from the
drip tray.
3. Swing the steam noz-
zle inwards over the drip
tray and place a container
under it. Open the water
control knob to the left
for hot steam.