To achieve proper drying, always use a liquid rinse agent, even if your
detergent contains a rinse agent or drying additive.
Rinse Agent Dispenser
Open the rinse agent dispenser by lifting the tab with your thumb.
light (model dependent).
Add liquid rinse agent to the dispenser as shown until the rinse agent
reservoir is full. Wipe up any excess rinse agent that puddles when the
dispenser reservoir is full.
Setting amount of rinse-aid
r:00r:06
Open the door (for hidden controls only).
Turn unit on by pressing the ON/OFF button.
Ar:05.
Release both buttons.
Press “C”to select the desired setting.
Save the selected language by pressing the START button.
Close the door (for hidden controls only).
Set the rinse aid option to r:00
lower setting) or water stains (select higher setting) visible on the utensils.
Rinse Agent
8