Filter
Top Products
English 5
in screw holes so that they are flush with the wall.Note: At least one screw must
be installed through a stud. Leave a 3/8” (6 mm) of each screw exposed.
4) Attach Chimney Mounting
Bracket
Attach spacers to holes on chimney mounting bracket arms, as seen in “Attach
Mounting Brackets” on page 5.
Attach chimney mounting bracket to wall through chimney screw holes created in
previous step. Use two screws.
5) Hang the Hood Place the hood by sliding the mounting holes in the top of the hood over the top
hood screws. Check and adjust for level. Tighten the screws.
Figure 3: Prepare Wall
lower hood screw holes
upper hood screw holes
chimney screw holes
centerline
template
30" min.
Figure 4: Attach Mounting Brackets