Filter
Top Products
PB
CONNECTING TO 208 VOLT CIRCUIT
In Canada:
Wiring must conform to Canadian Electrical Code
C22.1- latest edition.
You can obtain a copy of the Canadian Electrical
Code by writing:
Canadian Standards Association
178 Rexdale Boulevard
Rexdale (Toronto), Ontario, Canada
M9W 1R3
4. Wire size (COPPER WIRE ONLY) and connec-
tions must be suitable for the rating of the appli-
ance per the National Electrical Code require-
ments. The flexible armored cable extending from
the oven should be connected directly to the junc-
tion box.
5. The junction box should be located so as to allow
as much slack as possible between the junction
box and the oven so it can be moved if servicing
is ever required.
6. A U.L. listed conduit connector must be provided
at each end of the power supply cable.
This option is provided for areas where standard
240 Volt service is not available. This option must
be accessed with the oven connected to power
source, with the oven door (upper oven in double
oven) open, and using the following sequence:
1. Touch CANCEL pad.
2. Turn rotary knob clockwise until you hear
6 double beeps.
3. Turn rotary knob counter-clockwise until
you hear 9 double beeps.
4. Touch START pad.
5. Touch COOKING MODE pad; this sets
oven to 208 Volts.
6. Touch START pad to save selection of
208 Volts.