Filter
Top Products
English 7
Oven Bottom
The oven bottom conceals the lower heating burner. As a
result the burner is protected from damage and spills.
Note:
Do not place food directly on the oven bottom.
Cooktops
Accessories
Rack
Removing and Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front
of rack and slide out. To replace, fit the rack onto the
guides on the oven walls. Tilt the front of the rack upward
and slide the rack back into place.
WARNING:
Do not use aluminum foil or protective liners
to line any part of the appliance, especially
the oven bottom. Installation of these liners
may result in a risk of fire.
300 Series
500 Series
Flat Oven Rack
This rack can be used for
all cooking needs. Do not
clean in the self-clean
oven. Your oven comes
with two flat oven racks.
CAUTION:
To avoid burns, place oven racks in desired
positions before turning oven on. Always use
oven mitts when the oven is warm. If a rack
must be moved while the oven is hot, do not
let oven mitts contact hot heating elements.
Use caution when removing oven racks from
the lowest rack position to avoid contact with
the hot oven door.
To avoid possible injury or damage to the
appliance, ensure racks are installed exactly
per installation instructions and not
backwards or upside down.
REMOVE ALL OVEN RACKS and parts
before starting a self-clean cycle. If the
oven racks are left in the oven and remain in
the oven cavity for a self-clean cycle, the
glide ability of the oven rack system will be
damaged and will cause all oven racks to
loose their shiny finish and or turn blue.
Remove ALL oven racks and clean
according to instructions provided in the Care
& Cleaning section of this manual.