Filter
Top Products
9
With the silverware basket tops down, load the silverware basket following the patterns suggested in Figures 10 and 11). Place knives
with their handles up, and forks and spoons with their handles down.
If large or oddly-shaped items are to be loaded into the silverware basket with the tops up, load the items so that they do not nest
together. Load knives and sharp utensils with their handles up.
CAUTION
The sharp points and edges of knives and other sharp utensils can cause serious injuries. Load knives and other sharp utensils
with sharp points and edges down. Do not allow children to handle or play near knives and sharp utensils.
The Flexible Silverware Basket
This basket is designed for maximum versatility. The basket splits along its length, resulting in two halves that may be placed in a variety
Figure 13
Figure 10
Figure 11
12 place setting
Figure 12
A
B
5 4 3
5 3
5 3
5 3
5 3
5 3
3
4
2 1
1 2 3 4 5
2 1
2 1
6
76
2 1
2 1
2 1
5
3 5
3 5
3 5
3 5
3 5
6
7
4
4
4
4
1
1
1
1
1
1
2
2
2
2
2
2
4
4
4
4
4
4
of positions in the lower rack, greatly increasing the lower rack’s loading versatility.
To split the Flexible Silverware Basket:
1. Grasp the basket as shown in Figure 12A, and slide the two halves in opposite
directions, as shown in Figure 12A.
2. Pull the two halves apart, as shown in Figure 12B.
Some suggestions for placing the two halves in the lower rack are shown in Figure 13.
Cup Shelves (select models)
In addition to cups, the shelves can also hold large utensils. Grasp the cup shelves and fold
them down. Place cups upside-down on the cup shelves.
Knife Rack (select models)
The knife rack is an extra shelf for knives and other large utensils. It is assembled onto an
edge of the upper rack. Place knives with sharp sides down as shown,
Glass Rack Attachment (select models)
The rack attachment has two additional cup shelves upon which to place cups and large
kitchen utensils. The rack attachment is assembled on the rear edge of the lower rack. Be
-
fore placing the glass rack in the bottom rack, rst fold down the two rear rows of ip tines.
To assemble:
Slide the Rack Attachment in as shown, keeping the longest tines on the inside of the top
basket wire and on the outside of the lower basket wire. The short tines will snap into place.
Rack Attachment Use
To use the rack attachment, fold down the cup shelves and place items to be washed.
Cup Shelves
Knife Rack
Glass Rack Attachement
5
4
3
5
3
5
3
3
3
2
1
1
1
6
5
3
5
3
5
3
5
4
4
4
1
1
1
2
4
4
4
4
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
5
3
5
5
4
4
3 3
6
7
4
5
5
3
4