Filter
Top Products
OPERATION
Once detergent has been added and before closing the door
of the dishwasher check the wash arms to ensure that they
are free to move. With the detergent in the dishwasher and
arms free to move:
IMMEDIATE START
• Close the door of the dishwasher making sure that
door latches closed.
• Depress the on/off switch. The indicator light for the
cycle that was last selected will become illuminated.
• Depress the button for the cycle you desire two times
if different than the illuminated cycle.
• If you have a SHU or SHI 6800 series and wish to
wash the upper rack only depress the button labeled
Top Rack Only rM.
• The dishwasher will start automatically and continue
to the end of the selected cycle.
• At the end of the cycle the dishwasher will stop and
the letters "CL" will be displayed in the alphanumeric
display.
Note: Your dishwasher features a new sophisticated
sensor technology package, which is designed to
constantly scan and measure the conditions inside
the appliance. These changing conditions will influ-
ence the readout of the countdown display, In the
beginning, the time displayed will be 99
minutes. The microprocessor will, however, adjust
this projection continuously to the actual time.
DELAYED START
The start of the washing cycle can be delayed for up to 9
hours, in 1 hour increments.
• Close the door of the dishwasher making sure that
door latches closed.
• Depress the on/off switch. The indicator light for the
cycle thatwas last selected will become illuminated to
indicate the dishwasher is on.
• Immediately press the timer button labeled DELAY -
START - HOURS. The alphanumeric display will
change to "O".
• Press the DELAY - START - HOURS button as many
times as necessary until the alphanumeric display
shows the number of hours delay desired.
Note: The cycle may be changed at any time during the
delay time until the cycle starts.
• The dishwasher will not start until the indicated delay
has past.
• At the end of the cycle the dishwasher will stop and
the letters "CL" w'ill be displayed.
TO INTERRUPT OR RESET CYCLE
To interrupt cycle simply depress the on/off button to stop
operation. If you are interrupting the cycle during a wash
or rinse cycle please wait until the water noises stop before
opening the door, After opening the door leave it ajar for a
few minutes. The cycle then may be resumed by closing
the door and depressing the on/off button.
As a safety feature the dishwasher will automatically turn
itself off whenever the door is unlatched. However, if the
door is opened quickly while in a wash or rinse cycle some
water may splash out of the dishwasher. For this reason it
is recommended that the machine always be switched to
off before opening the door,
If you wish to reset the cycle to its beginning after
stopping the dishwasher:
I. Close the door of the dishwasher. Make sure that the
door is completely closed and latched.
2. Depress the on/off button, then depress SCRUB
WASH button and DELICATE/ECONOMY buttons at
the same time and hold for approximately 3 seconds.
You will see the alphanumeric display progress to
end. When the drain pump has stopped and the
alphanumeric display is at the end the cycle is
complete and the dishwasher is reset.
3. Depress the on/off button to shut-off the dishwasher.
4. The dishwasher is now ready to run your selected
wash cycle. Depress the on/off button to restart the
dishwasher.
Note: If you wish to change the cycle selection simply
depress the button of the cycle desired twice. The
light above the cycle will then become illuminated
to show it has been selected.
UNLOADING
When unloading the dishwasher always unload the lower
rack first and then unload the upper rack. This will
minimize the chance of drops from the upper rack falling
on the dishes in the lower rack. The silverware basket(s)
of the Bosch dishwasher may be removed for easy
unloading.
Also, when unloading, it is recommended that the dishes
be allowed to cool before handling. The dishes will cool
more quickly if the door is opened slightly.
12