Filter
Top Products
ENGLISH - 19
www.boschappliances.com
Selecting a Wash Cycle
The dishwasher will wash and dry the contents based
on cycle selection made. Refer to Tables 3, 4 and 5:
Wash Cycle Selection Chart to select the most ap-
propriate cycle for the wash load.
Follow these steps to select a cycle and start the
dishwasher:
SELECTING A WASH CYCLE
1. Close the dishwasher door, making sure
that door latches are closed.
2. Press the on/off switch.
3. Select the button for the program
desired.*
4. The dishwasher will start automatically
and continue to the end of the selected
cycle.
5. At the end of the cycle the dishwasher
will stop and either the “Clean” light will
become illuminated, the LED display will
show“CL” or “0”, or the dishwasher will
beep.
Note: All indicator lights will
remain illuminated until the on/
off switch is pressed or the door
is opened.
SHU/SHI Models:
1. Open dishwasher door.
2. Press the on/off switch.
3. Push the button once for the program
desired.
4. Close door until it latches and the pro-
gram will begin.
5. Same as #5 above.
Push the desired button TWO TIMES
if another program button is lit up.
Various Model Types
VARIOUS END OF
CYCLE INDICATORS
* Clean light illuminates
* CL or 0 is displayed on the LED.
* Cycle Completion Beeper sounds off
Cancel Drain
On
Off
SHU 9910/9920 & SHV Models
Figure 26
On / Off
Power
88
CycleCountdown
Power
Scrub
Plus
Scrub
Wash
Regular
Wash
Quick
Wash
Refill
Rinse
Agent
Delay
Start
Hours
Cancel
Drain
Rinse &
Hold
Delicate/
Econo
Top
Rack
Only
SHU/SHI
Figure 24
SHU 9910/9920/9950/ 8800 & 8810
Models & SHV Models:
INTEGRA Ltd.
On/Off
Cancel Drain
Opti
MISER
Delay
Start
Hours
Power
Scrub
Plus
Regular
Wash
Delicate
Wash
Quick
Wash
Rinse &
Hold
Refill Rinse Agent
Cycle Countdown
SHU 9950
Figure 25