Braun 4191 Blender User Manual


 
3
English
Thanks for purchasing this Multiquick/Minipimer
accessory. In combination with your Multiquick/
Minipimer 7/5 motor part (a), this chopper accessory
combines a jug blender and an ice crusher.
Caution
Please read the use instructions carefully and
completely before using this accessory with the
motor part of the basic unit.
The blades are very sharp! To avoid injuries, please
handle blades with utmost care.
Always unplug the appliance when it is left
unattended and before assembling, disassembling,
cleaning and storing.
The appliance is constructed to process normal
household quantities.
The jug (c) is not microwave-proof.
(a) Gear box/lid
(b) Blade
(c) Jug
(d) Anti-slip base/lid
(e) Ice blade
(f) Ice crusher insert
This accessory is perfectly suited for chopping meat,
cheese, onions, herbs, garlic, carrots, walnuts,
almonds, prunes etc. It is also suited for chopping
hard foods like parmesan cheese or chocolate.
For these goods, use the turbo switch.
N.B.: Do not chop extremely hard food, such as
nutmeg, coffee beans and grains.
Furthermore, the accessory is suitable for a variety of
other applications like shakes, drinks, purées, light
doughs and ice crushing.
Before chopping ...
pre-cut meat, cheese, onions, garlic, carrots (see
processing guide on page 2)
remove stalks from herbs, un-shell nuts
remove bones, tendons and gristle from meet.
For best results, please refer to the speed settings
recommended in the processing guide.
Chopping
(see picture section A on page 2)
1. Carefully remove the plastic cover from the blade
(b). Caution: the blade is very sharp! Always hold
it by the upper plastic part.
Press the blade onto the centre pin of the jug (c)
until it locks. Always place the jug on the anti-slip
base (d).
2. Place the food in the jug.
3. Put the gear box (a) on the jug.
4. Insert the motor part (A) into the gear box until it
locks.
5. Press switch (B) or (C) to operate the chopper.
During processing, hold the motor part with one
hand and the jug with the other. When chopping
hard foods, press down the motor part.
6. After use, press buttons to remove the motor
part.
7. Then remove the gear box.
8. Carefully take out the blade.
9. Remove the processed food from the jug.
The anti-slip base also serves as an airtight lid
for the jug.
Other applications
Light dough (pancake batter)
First pour liquids into the jug, then add flour and
finally eggs. Pressing the turbo switch, mix the batter
until smooth.
Crushing ice
(see picture section B)
1. Place the ice crusher insert (f) into the jug. Ensure
it fits properly.
2. Place the shaft of the ice blade (e) into the centre
hole of the ice crusher insert and press it down.
3. Fill ice cubes into the ice crusher insert.
4. Fit the gear box on the jug.
5. Insert the motor part into the gear box until it
locks.
6. Press the turbo switch until all ice cubes have
been crushed. After use, press buttons to remove
the motor part. Then remove gear box, ice blade
and ice crusher insert.
7. Remove the crushed ice or simply fill your drink
into the jug for serving at the table.
Alternative: First mix fruits in the jug with the
chopper blade (b), filling it up to 0.5 litres
maximum. Remove the blade and place the ice
crusher insert into the jug in order to crush ice
directly into the pureed fruits.
Cleaning
(see picture section C)
Clean the motor part with a damp cloth only. ⁄The
gear box (a) may be rinsed under the tap, but do not
immerse it in water. All other parts can be cleaned in
the dishwasher.
However, after processing very salty food, you
should rinse the blades right away.
Also, be careful not to use an overdose of cleaner or
decalcifier in your dishwasher.
When processing foods with colour (e.g. carrots),
the plastic parts of the appliance may become
discoloured.
Wipe these parts with vegetable oil before placing
them in the dishwasher.
99410606_MR40.indd 399410606_MR40.indd 3 11.03.2010 12:22:29 Uhr11.03.2010 12:22:29 Uhr