Filter
Top Products
BLENDER PARTS AND CARE
BLENDER PARTS AND CARE
COVER
The cover for your blender consists of two parts, the plastic feeder
cap and the vinyl cover. The cover is self-sealing, and is made o
f
vinyl which is resistant to absorption of odors and stains. The
feeder cap is removable for use as a measuring cup and provides an
opening for the addition of other ingredients.
CONTAINER
The container for the blender is graduated for easy measurement
and is made of glass. The convenient handle and pouring lip permit
easy removal of liquid mixtures while thicker mixtures are more
easily removed through the bottom opening. The glass jar is
marked with indicators for convenient measuring.
PROCESSING ASSEMBLY
The processing assembly consists of three parts: a sealing ring used
as a cushion between the container and the agitator; agitator of
high-grade stainless steel; a threaded container bottom.
MOTOR AND MOTOR BASE
The powerful multi-speed motor is the heart of the appliance and is
designed just for this unit. It is completely enclosed within the
housing.
3
ASSEMBLING YOUR BLENDER
CAUTION:
Follow these important steps to assemble, tighten, and
mount blender container quickly and correctly.
INJURY MAY
RESULT IF MOVING BLADES ARE EXPOSED.
1. Turn container up-side down so the small opening is at the top.
2. Make sure that the sealed ring on container opening is tight.
HOW YOUR BRAVETTI BLENDER WORKS
Your blender is a multi-speed appliance which operates on a wide
range of speeds from very slow to very fast. This range of speeds
makes food preparation easy, interesting and also saves time because
your blender processes foods in seconds.
ALWAYS HOLD CONTAINER WITH ONE HAND WHILE
PROCESSING
!
LOW SPEED MODES includes PUREE, WHIP and MIX functions.
HIGH SPEED MODES include GRATE, BLEND and LIQUEFY
functions. By touching the control buttons, you can get the speed
mode you need.
Another choice is PULSE to crush ice.
1.
Follow assembly steps as described above.
2.
Fill container with 2 cups of ice cubes.
3.
Place lid assembly on container.
4.
Spin the knob to the ICE CRUSH/PULSE position.
5.
Ice can be crushed by continuously spinning the knob until
desired consistency is reached.
6.
Let go of the knob and let it revert to the OFF position
automatically. Unplug appliance.
7.
Remove container from blender base.
4