Bravetti EP64 Fryer User Manual


 
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions.
2. Do not touch hot surfaces, always use lid handle or knob.
3. To protect against electrical shock, do not immerse cord and plug of this appliance in water or other
liquids.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off
parts and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has
been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for
examination, repair or adjustment. See warranty.
7. Never overfill the fryer with oil. Fill only between the minimum and maximum levels, as indicated inside
the oil container.
8. Be sure handle is properly assembled to the basket and locked in place. See detailed assembly
instructions on page 3 Fig. 1.
9. The use of accessory attachments not recommended by the appliance manufacturer may cause
injuries.
10. Do not move any appliance containing hot oil or other hot liquids.
11. Do not leave appliance unattended while in use.
12. Do not use outdoors.
13. Do not let cord hang over the edge of the table, counter or touch hot surfaces.
14. Do not place on or near a hot gas or electric burner, or in a heated oven.
15. Do not use appliance for other than intended household use.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
SPECIAL SAFETY INSTRUCTIONS
A short power supply cord is provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord. An extension cord (or longer detachable cord) is not recommended for
use with deep fryers.
Do not immerse the unit in water or any other liquid.
When opening the lid after frying, first release the lid, then wait a moment to allow the steam inside
to escape before opening fully.
To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does
not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
1
SAVE THESE INSTRUCTIONS
REV. 09/2000B