Filter
Top Products
7. FILTERING & CHANGING THE OIL
• Make sure the deep fryer is unplugged and the oil has cooled before cleaning or storing the
deep fryer.
• The oil does not need to be changed after each use. In general, the oil will be tainted rather
quickly when frying food containing a lot of protein (such as poultry, meat or fish). When oil is
mainly used to fry potatoes and is filtered after each use, it can be used 8 to 10 times.
However, do not use the same oil for longer than 6 months.
• To filter the oil, first make sure the oil has cooled and then empty the oil from the oil container
(#3) into another container or bottle. Fig. 6
Wash and dry the oil container and basket. Refill the oil container with the oil, pouring the oil
through a wire strainer or a filter. Fig. 7
Fig. 7
8. How To Reset the Deep Fryer
• Set the temperature setting dial (#8) to “Min” position.
• Turn the “On/Off” switch (#6) to the “Off” position.
• Let the deep fryer cool for minimum 15 minutes.
• Push the reset button (#18) located on the back of the control panel (#5) inside the cord
storage (#19) compartment. Fig. 8
• Turn the “On/Off” switch (#6) to the “On” (#6) position.
Cord Storage
Fig. 8
Reset
If for some reason the deep fryer stops heating, the reason might be that the safety reset
switch has disconnected. To reconnect the the deep fryer, follow the instructions listed below:
11
Fig. 6