Filter
Top Products
3
OPERATING INSTRUCTIONS
275 Watt Power Unit
The 275 Watt Power Unit operates on
120V., 60Hz. electrical power. Never
allow the power unit to become wet when
plugged into an electrical outlet.
Warning: The power unit should
never be immersed in water.
Caution: Make sure that the
power unit is unplugged from
power source and the blades have
stopped turning before attaching or
removing any accessory.
To operate the Power Unit, press on the
On/Off Pulse button located on the top of
the unit. The Power Unit will stop
operating when you remove your finger
from the pulse button. (Fig. 6)
The Stick Blender is an indispensable kitchen tool for blending, chopping, mixing or
pureeing when preparing your favorite recipes. For best results, be sure to carefully read
all the instructions contained in this book before using this appliance.
Important: Do NOT operate the
appliance when empty.
Using the Food Processor
Caution - Blades are sharp. Use
extreme caution when handling the
blade, always hold it by the plastic hub.
Note: The Food Processor can be used
either with both blades or with the main
blade only. Always remove blade guards
before using.
• Place the processing jar on a stable, flat
surface.
• Insert the upper processing blade onto
the processing jar main blade (Fig. 1)
• Holding the blades by the plastic shaft,
place inside the processing jar making
sure that they are positioned over the
blade locating pin inside the processing
jar. (Fig. 2)
• Add ingredients to be processed to the
processing jar.
• Place the gear box in position on the
processing jar. (Fig. 4)
• Attach the power pack to the gear box by
turning the power pack counter clockwise
to lock in place. (Fig. 5)
• To remove the power pack from the gear
box, turn the power pack clockwise.
• In order to obtain a better quality of
chopping, operate the appliance by using
a "pulse" method. (Fig. 6)
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
Fig. 6
• If the ingredients stick to the sides of
the jar, dislodge the pieces with a
spatula and operate 2 or 3 times
using the "pulse“ method.
• Do NOT operate the appliance
continuously for more than 15
seconds.
OPERATING INSTRUCTIONS
CAUTION: Never place food
processor jar in microwave or over
direct heat.
NOTE: The bowl lid can
be used on the
processing jar if you wish
to store something.
(Fig. 7)
Using the Power Pack with the
Chopping Bowl
Caution: Make sure that the
power unit is unplugged from
power source and the blades have
stopped turning before attaching or
removing any accessory.
To operate the Power Unit, press on the
On/Off Pulse button located on the top of
the unit. The Power Unit will stop
operating when you remove your finger
from the pulse button.
Important: Do NOT operate the appliance
when empty.
Caution - Blades are sharp. Use
extreme caution when handling
the blade, always hold it by the plastic
hub. Always remove blade guards
before using.
• In order to obtain a better quality of
chopping, operate the unit by using a
“pulse” method. (Fig. 11) If the
ingredients stick to the sides of the
chopping bowl, dislodge the pieces
with a spatula and operate 2 or 3 times
using the “pulse” method.
• Do NOT operate the appliance
continuously for more than 15
seconds.
• Remove the power pack, gear box and
the chopping blades carefully and
cover the chopping bowl with the lid for
storage. (Fig. 11)
Fig. 7
• Place the chopping bowl on a stable,
flat surface.
• Insert the chopping bowl upper
chopping blade onto the main
chopping blade.
• Place the assembled chopping blades
into the chopping bowl onto the blade
locating pin. (Fig. 8)
• Add ingredients to be chopped.
• Place the gear box in position on the
chopping bowl. (Fig. 9)
• Attach the power pack to the gear box
by turning the power pack counter
clockwise to lock in place. (Fig. 10)
• To remove the power pack from the
gear box, turn the power pack
clockwise.
Fig. 8 Fig. 9
Fig. 10
Fig. 11
4
CAUTION: Never place chopping
bowl in microwave or over direct
heat.