Breville ABN77000085549 Mixer User Manual


 
ASSEMBLY AND OPERATION cont’d
8
BEFORE FIRST USE
Before using your Breville Wizz Mix Plus for
the first time, wash the beaters in warm
soapy water with a soft cloth. Rinse and dry
thoroughly. They may be washed in
a dishwasher.
CLEANING AFTER USE
1. Always ensure that the speed selector
switch is in the 'OFF' (O) position and that
the power is turned off at the power
outlet. Then remove the plug from the
power outlet.
2. To remove the mixer motor for cleaning
press the Mixer Release Button and lift
the mixer motor from the support arm.
3. Holding the motor unit, press the eject
button and remove the beaters.
4. Use a rubber spatula to scrape remaining
mixture from the beaters/dough hooks.
Then wash the bowl, beaters and dough
hooks in warm soapy water with a soft
cloth. Rinse and dry thoroughly. They may
also be washed in a dishwasher.
5. Do not allow the beaters to soak in water
for an extended period of time, as this
may lead to the metal finish being
damaged.
6. Wipe the mixer body and mixer stand with
a damp cloth and dry. Polish with a soft
dry cloth.
7. Wipe any excess food particles from the
power cord.
CARE AND CLEANING
9
TURBO BOOST FUNCTION
Pressing the Turbo Boost button while mixing
provides an extra burst of power, overriding
the speed setting being used. Press the
Turbo Boost button and hold it down for no
more than 30 seconds to avoid overheating.
After the Turbo Boost has been used, always
turn the mixer off and allow it to cool down
for a few minutes before using again.
AUTOMATIC MIXING BOWL
ROTATION (GEAR DRIVEN
SYSTEM)
The Wizz Mix Plus features a unique gear
driven mixing bowl rotation system that
automatically rotates the mixing bowl at an
even speed during operation for complete
hands free operation and an efficient, even
mixing action of ingredients.
The speed of the bowl rotation adjusts
automatically to the mixing speed selected.
The mixing bowl will not rotate correctly
unless the beater/dough hooks are
correctly inserted (see 'Attaching the
Beater' Page 6).
Only ever use the beaters/dough hooks
supplied with this unit.
When using the mixer on the stand, only
use the mixing bowl supplied with this unit.
Never force or hold the mixing bowl while
it is automatically rotating as this will
damage the gear system.
USING YOUR WIZZ MIX PLUS
AS A HAND MIXER
The Wizz Mix Plus can be used
independently of the mixing stand as a hand-
held mixer.
Insert the beaters/dough hooks as per
steps 1 to 4 (page 6). Continuously guide
the beaters/dough hooks through the
mixture for uniform mixing. When mixing
is complete slide the speed selector to
the 'OFF' position.
Turn power off at the power outlet and
unplug the cord. Remove the beaters/dough
hooks by pressing the eject button while
grasping the shafts.
The beaters/dough hooks will be released
automatically. DO NOT try to pull the
beaters/dough hooks out of the sockets.
Use a rubber spatula to scrape remaining
mixture from the beaters/dough hooks.
AVOID ALLOWING THE BEATERS TO HIT AGAINST THE SIDE OF THE
MIXING BOWL WHILE THE MIXER IS OPERATING AS THIS WILL RESULT IN
DAMAGE TO THE BEATERS.
NEVER IMMERSE THE MIXER, POWER CORD OR PLUG IN WATER OR ANY
OTHER LIQUID.
When first using your Wizz
Mix Plus, you may notice an
odour from the motor. This
is normal and will dissipate
as the motor is run in.
Do not wash or soak the
mixer stand in water or any
other liquid. Clean with a
damp cloth and dry. Do not
allow water or any liquid to
enter the gear system as
damage may result.
Do not use abrasive
scouring pads or cleaners
when cleaning the beaters
as these may scratch the
beater surface. Also ensure
that the beaters are not
soaked in water for
extended periods of time ie.
For several hours or
overnight, as this may
damage the metal finish.
BR3936 EM6 WizzMix Plus Book 22/7/02 4:29 PM Page 8