Breville BBL300 Blender User Manual


  Open as PDF
of 24
 
7
Know Your Breville Power Blender
Before first use
Removeandsafelydiscardanypackagingmaterialand
promotionallabels.
Disassembletheblenderjugbyfollowingthestepsinthe
‘Disassemblingtheblender’sectionbelow.Washthelid,
innerlid,blenderjug,siliconseal,blenderjugbaseand
bladeassemblyinwarm,soapywaterwithasoftcloth.
Rinseanddrythoroughly.
Wipe the motor base with a damp cloth and dry
thoroughly.
Disassembling the blender
1. Placethemotorbaseonaat,drysurfacesuchas
abenchtop.Ensurethatthespeedselectiondialis
intheoff‘0’position,theapplianceisswitchedoffat
thepoweroutletandthepowercordisunplugged.
2. Remove the blender jug fromthe motor base by
holding the motor base rmly and grasping the
blenderjughandle andpulling theblender jugup
andoffthemotorbase.
Operating Your Breville Power Blender
3. Removethelidandinnermeasuringcupfromthe
blenderjug.
4. Placethejugupsidedownonaat,drysurfacesuch
asabenchtop.
5. Holdthejughandleandturntheblenderjugbase
anti-clockwise to remove. Carefully lift the blade
assemblyoutofthenarrowendoftheblenderjug.
Removethesiliconsealfromoutsidethenarrowend
oftheblenderjug.
6. Non-slip feet
7. Blade assembly – easily removable for cleaning
8. Blender jug base
9. Motor base
10. 900W motor (not shown)
NOTE
The blending blades are extremely sharp. Avoid any
contact with fingers and hands.
BBL300_IB_FA.indd 7 2/11/09 3:23 PM
 previous next