Breville BBL300 Blender User Manual


  Open as PDF
of 24
 
8
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE BLENDER WHILST THE MOTOR
IS RUNNING.
Using the blender
1. Ensure the speed selection dial is in the off ‘0’
position. Insert the power cord into a 230/240V
poweroutletandswitchonatthepoweroutlet.
2. Removethelidandaddfoodand/orliquidintothe
blenderjug.
3. Select the desired speed by turning the speed
selectiondialclockwisetoaspeedbetween1(low)
and5(high).Thespeedcanbechangedatanytime
duringtheblendingprocess.Turnthespeedselection
dialanti-clockwisetoselecttheICE(Pulse)setting.
Speed1-2(lowspeed)issuitableforsavourydipsand
thinbatters.
Speed3-4(medium speed)is suitableforsaucesand
drinks.
Speed 5 (high speed) is suitable for smoothies and
cocktails.
ICE (Pulse) can be used for foods that require short
burstsofpowertoprocesssuchasherbs,nuts,small
vegetablesandice.WhenusingtheICE(Pulse)function,
holdtheblenderlidinplace.
Operating Your Breville Power Blender continued
Assembling and attaching the
blender jug
1. Placethemotorbaseonaat,drysurfacesuchas
abenchtop.Ensurethespeedselectiondialisinthe
off‘0’position,theapplianceisswitchedoffatthe
poweroutletandthepowercordisunplugged.
2. Place theblender jug upsidedown on aat, dry
surfacesuchasabenchtop.
3. Holdtheblenderjughandleandplacethesiliconseal
ontothenarrowendoftheblenderjugthencarefully
insertthebladeassembly.
4. Placetheblenderjugbaseoverthebladeassembly
andturnclockwisetosecureintoposition.
5. Turntheassembled blenderjuguprightandplace
ontothemotorbase.
6. Insert the inner measuring cup into the lid, then
insertthelidrmlyintothetopoftheblenderjug.
NOTE
Ensure lid is placed onto blender jug firmly and the
inner measuring cup is in position before operating
the blender. Do not operate blender without the lid.
Additional ingredients can be added whilst blending
by removing the inner measuring cup and placing
or pouring ingredients through the middle opening
in the lid.
NOTE
Liquids should be placed into the blender jug before
solid ingredients, unless specified differently in a
recipe.
NOTE
All foods should be cut into cubes (approx. 2-3cm
square) to achieve an even result.
NOTE
When using the blender for the first time, you may
notice an odour coming from the motor. This is
normal and will dissipate with use.
NOTE
If any moisture or liquid appears on the motor base,
ensure the speed selection dial is in the off ‘0’
position, the appliance is switched off at the power
outlet and the power cord is unplugged, remove the
blender jug then wipe the spillage immediately with
paper towel and dry thoroughly. Ensure the blender
jug is correctly assembled before placing back onto
the motor body and operating.
BBL300_IB_FA.indd 8 2/11/09 3:23 PM
 previous next