Filter
Top Products
13
Cordless Hand Blender (smoothie attachment)
To detach the smoothie attachment
Ensure the Cordless Hand Blender is switched off by
keeping hands clear of the Power button and Speed
button. Unscrew the smoothie attachment from the
motor body in a clockwise direction (See Fig. 1).
To attach the smoothie attachment
Hold the shaft with aerating blades down, and align
the top end of the smoothie attachment with the
corresponding end of the motor body. Screw the shaft
into the motor body in an anti-clockwise direction.
To use the smoothie attachment
Ensure the smoothie attachment is completely and
properly assembled as detailed on the left.
1. Place food to be processed into the mixing jug
provided (or a sufficiently large mixing bowl or
saucepan). The mixing jug provided should only
be filled up to the 'LIQUID MAX' mark when
blending liquids.
2. Place the smoothie attachment as deeply as
possible into the mixing jug and depress the
Power button (top button) to turn the Cordless
Hand Blender on. While still depressing the
Power button, depress the Speed button (bottom
button). To select the desired speed, the Speed
button should be lightly depressed for low speed
and firmly depressed for high speed. Both the
Power button and the Speed button must be
depressed simultaneously for the required
duration of operation (see Fig. 2).
3. Work through the ingredients in the mixing jug
with a gentle raising and lowering motion.
4. Switch off the Cordless Hand Blender by
releasing the Power and Speed buttons.
5. Ensure the motor has completely stopped before
lifting the Cordless Hand Blender out of the
mixing jug.
12
Fig 1
Power button
Speed button
Fig 2
Cordless Hand Blender (chopper bowl attachment)
To detach the chopper attachment
• Remove the motor from the chopper lid.
To attach the chopping blade, chopping
bowl and lid
• Place the food inside the chopper bowl. Do not
exceed the max marking.
• Ensure the chopper bowl lid is dry with no water
left inside before reattaching.
Always place the chopping blade on its pivot
pin on the bottom of the bowl before placing
any contents into the bowl. Do not lift the
blade before the complete chopping operation
is finished.
Note
To use the chopper bowl
Ensure the chopper is completely and properly
assembled as detailed on this page.
1. Depress the Power button (top button) to turn the
Cordless on. While depressing the Power button,
depress the Speed button (bottom button).
To select the desired speed, the Speed
button should be lightly depressed for low
speed and firmly depressed for high speed.
Both the Power button and the Speed button
must be depressed simultaneously for the
required duration of operation.
2. When processing has finished, switch off the
Cordless Hand Blender by releasing the Power
and Speed buttons.
3. Ensure the motor has completely stopped before
removing the motor body from the lid of the
chopper bowl.
Recommendations when using
the Cordless Hand Blender with
Chopper Bowl
• Do not operate your Cordless Hand Blender when
the chopper bowl is empty.
• During processing,hold the motor body with one
hand and chopper bowl and lid with the other.
• When processing,cut food into uniform sizes to
ensure quicker, even and more consistent results.
• DO NOT process hard foods such as coffee,cereals
or chocolate in lumps and this may result in
damage to the blade.
• DO NOT process boiling or hot foods in the
chopper bowl.
• NEVER remove the blade from the bowl before the
processing is completed.
• The Cordless Hand Blender blends food and liquids
rapidly, therefore it is easy to over process.
Remember to check food throughout the operation.
BR8252 BCS600XL_Book_FRE_SPN 13/12/06 4:28 PM Page 12